Data interface rs 232c, Data interface, Serial handwheel interface – HEIDENHAIN TNC 407 (243 020) Service Manual User Manual
Page 23: Encoder 1, Encoder 2, Encoder 3, Encoder 4, Encoder 5, Encoder 6, Nominal value output 1, 2, 3, 4, 5. s
HEIDENHAIN
JOHANNES
D-83292
31-c
SERVICE MANUAL TNC
Issue:
01.09.1995
Page 17
Flange socket with female insert
21 to 25
Flange socket with female insert
Signal
Designation
Pin No.
X23
Serial Handwheel Interface
Flange socket with female insert
D-Sub)
Pin No.
Assignment
H R
Assignment HR 332
3. 5
6 DTR DTR
a I
RXD RXD
7 do not assign TXD
housing external shield housing external shield = housing
Pin Layout: CLP BOARD TNC 415
Xl, X2, X3, X4, X5 Encoder Inputs 1 to 5 X10 Ref. Pulse Inhibit *
see section 5.1.4 Xl, X2, X3, X4 Flange socket with female insert
X6
Encoder Input 6
X8
Nominal Value Output
4. 5.
Xl2
Touch Probe System
no longer required
This manual is related to the following products: