Machine parameters – HEIDENHAIN TNC 407 (243 020) Service Manual User Manual
Page 128
SERVICE MANUAL TNC
Issue:
01.09.1995
Page
108
20. Machine Parameters
The following list contains the machine parameters for all software versions. However, as some machine
parameters are not valid for certain controls or have been introduced /eliminated with a certain software
version, columns with symbols for differentiation have been added after the parameter numbers.
Explanation of the Symbols
With this control, the machine parameter is valid for all software versions.
04
The machine parameter has been introduced with a certain software version
(e.g. 04 means introduction with software version 04).
machine parameter has been eliminated starting with a certain software version
(e.g. 04 means elimination as of software version 04). or it has been replaced by
parameter.
This machine parameter is not available on this control.
The machine parameter is accessible via the code number 1’23.
Explanation of the Columns
407 AS
Old software 243 07.
415AS
Old software
243
259 91.
407 NS
New software 243 02.
415
New software 259 96.. 259 97.
Structure
The machine parameters are subdivided into groups.
Due to the structure of the parameter numbers, the list can be expanded easily.
0 999 Encoders and machine tool axes: allocation, evaluation, compensation
Operation with feed precontrol