HEIDENHAIN TNC 407 (243 020) Service Manual - Manual (Page 131)

User Parameters
By means of the MOD function "User Parameters" several machine parameters
can be accessed easily (e.g. adaptation of the data interface). This user
parameters accessible via MOD function are defined by the machine tool
manufacturer through machine parameters.
Entry Values
Possible entry values are:
•
The numbers 0 and 1 to select functions, signs, counting directions etc.
•
Numerical values for feed rates, displacements etc.
•
Decimal values that can be calculated by combining several functions
(bit-coded).
•
Bit patterns (marked by %), as of TNC407 with NC software 243 03* --
e.g. MP 10: %00111
i.e.
X, Y, Z with encoder (1)
IV, V without encoder (0)
•
Hexadecimal values (marked by $), as of TNC407 with NC software 234 03* --
e.g. MP 7353.0: $ 0F818A0
Structure
The machine parameters are subdivided into groups.
The machine parameter number are structured such that the list can be expanded
easily.
0-999 Encoders and machine axes: allocation, evaluation, compensation
1000 Positioning
1400 Operation with feed forward control
1700 Operation with servo lag
3000 Spindle
4000 Integral PLC
5000 Adaptation of the data interface
6000 3D-touch probe (general parameters)
6210 Digitizing with 3D-touch probe
6500 Tool calibration with TT 110
7100 Tapping
7200 Display and Programming
7320 Colors, general display and FK graphics
7330 USER parameters
7350 Colors, general display and FK graphics
7400 Machining and program run
7600 Hardware
RH
1.0 TNC 407/415
Machine Parameters Overview 16.01.95 10.1 2