HEIDENHAIN TNC 407 (243 020) Service Manual User Manual
Page 82
SERVICE MANUAL TNC
Issue:
01.09.1995
Page 69
In general only the files in the RAM must be stored on an external data medium.
(Note down the file name of the ASCII file
in the interface mode
FE2. as the TNC cannot display
the directory of the external data medium.)
Switch TNC to operating mode EDITING
(key on
Prepare TNC for input of code number
Enter code number, acknowledge with ENT
Activate data transfer menu
Soft key
ALL< to display all file types
Use arrow key at the VDU to switch the soft-key
row to the desired extension
Soft key
FILES< for desired extension
Switch soft-key row back to data transfer menu
If necessary: select desired file with arrow key
If necessary: rename file with soft key
Soft key
to transfer data
Soft key
to end data transfer menu
TNC is in the operating mode EDITING
Several programs with the extension
may be stored in the RAM.
The selected program is marked by an
in the status window. Note down the
program name so that you can re-select it after the downloading process.