HEIDENHAIN TNC 407 (243 020) Service Manual - Manual (Page 186)

Function MP A B C D E F Input AE-6
No. Bit Entry Value
Datum in datum table 7475 - - - - Š Š 0 = datum point is workpiece datum
1 = datum point is machine datum
0
Output of tool number or pocket
number
with TOOL CALL block 7480.0
Š
Š
Š
Š
-
-
-
Š
Š
Š
Š
-
-
-
Š
Š
Š
Š
05
-
-
Š
Š
Š
Š
04
-
-
Š
Š
Š
Š
Š
08
08
Š
Š
Š
Š
Š
Š
Š
0 to 6
0 = no output
1 = output of tool number only when
tool number changes (W262)
2 = output of tool number with every
TOOL CALL (W262)
3 = output of pocket number (W262) and
tool number (W264) only when tool
number changes
4 = output of pocket number (W262) and tool
number (W264) with every TOOL CALL
5 = output of pocket number (W262) and tool
number (W264); pocket table does not
change.
6 = output of pocket number (W264) with
every TOOL CALL; pocket table does not
change.
2
RH
1.0 TNC 407/415
Machine Parameters MP 7475 - MP 7480.0 16.01.95 10.2 55