Grass Valley PLS200 - Manual (Page 91)

PLS200 Library Installation and Operation 69
Chapter
6
Packing and Shipping the Library
This chapter describes the procedures for:
• Returning the library for service
• Shipping the library
Returning the Library for Service
If you need to return the library to the factory for service, contact Tektronix
Technical Support. See “Tektronix Product Support” on page xvii. If your
service representative instructs you to return the library, follow the shipping
instructions on the following pages.
➤ Important If you are returning the library for service, remove and keep all
cartridges, cartridge magazines, SCSI cables, terminators, jumpers, and
power cables.
Shipping the Library
If you need to ship the library to another location, make sure you pack the
library in the original packing materials. These include:
• Shipping containers
• Packing foam
• Antistatic bag
You will also need packing tape and banding material.
CAUTION: To avoid damaging the library and voiding your warranty, be
sure to use the original shipping materials (or replacement materials obtained
from Tektronix) when repacking and shipping the library. Do not use the
shipping carton and packing materials to ship items other than or in addition
to a library.
!