Grass Valley PLS200 - Manual (Page 51)

Power-on the Library
PLS200 Library Installation and Operation 29
Tape Drive Power-on Self-test
During its power-on self-test, each tape drive checks its operating conditions
and sends status information to the library.
Library Power-on Self-test
During its power-on self-test, the library:
• Engages the locking solenoid in the door.
• Moves the CHM to the home positions on the short and long axes.
• Moves the drum to the home position.
• Retracts the entry/exit port transport arm.
• Verifies the CHM's full range of motion by moving it to the top of the
long axis.
• Touches each cartridge to update the cartridge inventory.
• Moves to the home position on the long axis.
If Problems Occur...
If the library does not complete its power-on self-test and nothing is displayed
on the LCD, check the following:
• Is the power switch on? (Is the I pressed?)
• Is the power cord inserted correctly?
• Is the library door closed?
• Is the video disk recorder on?
If the library does not complete its power-on self-test and the LCD displays an
error code, see Appendix B, LCD Error Codes.
For more detailed troubleshooting information, see Chapter 9,
Troubleshooting.