Grass Valley PLS200 - Manual (Page 44)

Chapter 1 Installing the Hardware
22 PLS200 Library Installation and Operation
Install a Cleaning Cartridge
The following procedure describes how to manually install a cleaning cartridge
in the fixed cartridge slot. To replace this cartridge later, use the Export
Cartridge and Import Cartridge functions of the Media Manager in the Profile
Tool Box. Refer to the discussion of the Media Manager in the Profile System
User Manual.
CAUTION: Use Tektronix-approved cleaning cartridges only. Using cloth
swabs, cotton swabs, cleaning agents, or cleaning cartridges not approved by
Tektronix will void the tape drive warranty.
To install a cleaning cartridge in the fixed cartridge slot:
1. Position the cartridge so that the window showing the tape reels is toward the
top (see Figure 1-14).
➤ Important The cleaning cartridge must have a bar code label.
2. Insert the cartridge into the fixed cartridge slot until it snaps into place.
Figure 1-16 Installing a cartridge in the fixed cartridge slot
!