Grass Valley PLS200 - Manual (Page 135)

Element Position Information
PLS200 Library Installation and Operation 113
Element Position Information
To display information about the position of elements in the library:
1. From the Library Info Menu, select Inventory Menu.
2. From the Inventory Menu, select Position Information. The library displays
the following screen:
3. Press to scroll through the information for each element index.
Fields on Element Position Screen
P (Present) Indicates whether a specific magazine or tape drive is installed. If the element
index references a storage element, this flag indicates whether that particular
magazine is installed. If the element index references a tape drive, this flag
indicates whether that particular drive is installed.
0 – Not installed.
1 – Installed.
Note: This flag is not used for the CHM or the entry/exit port.
A (Accessible) Indicates whether a drive is empty, a cartridge is loaded in the drive, or the
cartridge is ejected:
0 – A cartridge may be loaded in the drive.
1 – The drive is empty, or the cartridge is ejected and ready to be picked.
CTS Indicates whether the element is a tape drive:
0 – The element is a tape drive.
1 – The element is not a tape drive.
Warning Not currently used.
Element Occupied:
E L E M P O S , I N X = 0 :
L o n g A x i s : 6 3 9 5
D e p t h : 0
D r u m A x i s : 0
↓