Grass Valley PLS200 - Manual (Page 37)

Remove the Packing Foam
PLS200 Library Installation and Operation 15
Remove the Packing Foam
Remove the packing foam from the library as shown in Figure 1-10.
1. Take out the center cross piece shown at arrow 1.
2. Move the vertical piece to the right as shown by arrow 2 to disengage it from
the CHM.
3. Bend the top of the vertical piece to the left and remove the top cross piece.
4. Pull the top of the vertical piece out of the door enough to allow removal of
the bottom cross piece, then take out the vertical piece.
Figure 1-10 Removing the packing foam from the library
➊
➋
➌
➍