Grass Valley PLS200 - Manual (Page 66)

Chapter 3 Operating the Library
44 PLS200 Library Installation and Operation
Error Codes
If a library hardware error occurs, an error code appears on the third and fourth
lines of the Main Screen. The third line provides the error's numerical code; the
fourth line provides a brief explanation of the error. You must correct the error
before operation can continue; refer to Appendix B for a list of error codes and
corrective actions.
Main Menu
Use the Main Menu (shown below) to access LCD options and functions. To
access the Main Menu, press from the Main Screen.
• Select Main Screen to return to the Main Screen.
• Select Interface Menu to change the control mode (see page 48) and
configure the serial ports (see page 95).
• Extend/Retract E/E can be used to control the entry/exit port. Not
recommended for adding tapes because it upsets the tape inventory database.
• Select Configuration Menu to set or change the library's configuration
options (see Chapter 2).
• Select Maintenance Menu to run demos (see page 95), or perform
diagnostic tests (see page 85).
P L S 2 0 0
V E R n . n n . n n h h : m m : s s
S t a t u s : E r r o r 1 1
S O U R C E E M P T Y
Escape
→
M a i n S c r e e n
E x t e n d / R e t r a c t E / E
I n t e r f a c e M e n u
C o n f i g u r a t i o n M e n u
↓