Cycle gripper – Grass Valley PLS200 User Manual
Page 113
Cycle Gripper
PLS200 Library Installation and Operation
91
3. Press
. The library displays the following screen:
4. Press
and
to select the number of cycles, in increments of ten, that
you want the Cycle Pick/Place test to run.
5. Press
. The CHM picks and replaces the cartridge the number of
times you specified.
Cycle Gripper
The Cycle Gripper test closes and opens the gripper the number of times you
specify. For best results, move the CHM to the park position so you can see the
movement of the gripper through the library window.
1. From the Diagnostics Menu, press
or
to select Park and press
. The library moves the CHM to the park position at the bottom of the
long axis.
2. Press
to return to the Diagnostics Menu.
3. Press
to select Cycle Gripper and press
. The library displays the
following screen:
4. Press
and
to select the number of cycles, in increments of ten, that
you want the Cycle Gripper test to run. Press
.
Enter
S e
t
C y c
l
e s
1 0
↑
I
n c
r e a s e
↓
D e c
r e a s e
Enter
Enter
Escape
Enter
S e
t
C y c
l
e s
1 0
↑
I
n c
r e a s e
↓
D e c
r e a s e
Enter