Grass Valley PLS200 - Manual (Page 38)

Chapter 1 Installing the Hardware
16 PLS200 Library Installation and Operation
Move the CHM Out of the Way
Move the cartridge handling mechanism (CHM) so it is not blocking the
magazine mounting plates on the drum. To move the CHM, reach in through
the door and push against the base of the CHM, sliding it firmly to the bottom
of the long axis until it stops. See Figure 1-11.
➤ Important Do not touch the lens on the bar code scanner; smudges on the
lens can cause scanning errors.
Figure 1-11 Moving the CHM to the bottom of the long axis