Grass Valley PLS200 - Manual (Page 116)

Chapter 7 Performing Diagnostics
94 PLS200 Library Installation and Operation
Cycle E/E
The Cycle E/E test exercises the entry/exit port transport assembly.
1. From the Diagnostics Menu, press or to select Cycle E/E and press
. The library displays the following screen:
2. Press and to select the number of cycles, in increments of ten, that
you want the Cycle E/E test to run and press .
Enter
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e
Enter