Grass Valley PLS200 - Manual (Page 133)

Bar Code Label Information
PLS200 Library Installation and Operation 111
Fields on Label Info Screen
Label Info:
INX Indicates the element index for which information is being displayed.
Label If the element location contains a cartridge for which the bar code label has been
scanned, contains the cartridge label.
Valid Indicates whether the Label field is accurate:
0 – The Label field is not accurate.
1 – The Label field is accurate.
Error Indicates whether the bar code scanner was unable to read the cartridge label:
0 – The bar code scan was successful, a reset condition occurred, or the door was
opened.
0 – The bar code scanner could not read the bar code label because there was no label
on the cartridge.
61 – The bar code scanner could not read the bar code label because the label was
unreadable.
62 – The bar code scanner could not read the label because the magazine or tape drive
is not installed.
65 – The bar code scanner could not read the bar code label because a Direct Memory
Access overrun occurred.
67 – The bar code scanner could not read the bar code label because DMA channel 2
timed out.
69 – The bar code scanner could not read the bar code label because the label was
upside down or misplaced.
Send Vol
Match Indicates whether the cartridge label matched the template sent with the last SEND
VOLUME TAG SCSI command:
0 – The label did not match the template.
1 – The label matched the template.