Modifying a tenant, Deleting tenants, Deleting a single tenant – H3C Technologies H3C Intelligent Management Center User Manual
Page 92: Batch deleting tenants, Viewing the tenant topology
82
{
Description—Enter the description of the tenant.
{
Select Device—Configure the virtual OpenFlow devices that the tenant can use. For information
about the configuration procedure, see "
."
The tenant is in Unknown state when its virtual OpenFlow device list is empty.
4.
Click OK.
Modifying a tenant
1.
Access the tenant list page.
2.
Click the Modify icon
for the tenant to be modified.
3.
Configure the following parameters:
{
Description—Enter a new description for the tenant.
{
Select Device—Modify the virtual OpenFlow devices that the tenant can use. For information
about the configuration procedure, see "
."
4.
Click OK.
Deleting tenants
Delete virtual OpenFlow devices one by one or in batches.
Deleting a single tenant
1.
Access the tenant list page.
2.
Click the Delete icon
for the tenant to be deleted.
3.
Click OK.
Batch deleting tenants
1.
Access the tenant list page.
2.
Select the tenants you want to delete.
3.
Click Delete.
A confirmation dialog box appears.
4.
Click OK.
Viewing the tenant topology
Click the View Topology icon
for the tenant to be viewed. The logical topology page appears. For
information about viewing the tenant topology, see "