Viewing device information, Viewing device details, Viewing openflow instances on an openflow switch – H3C Technologies H3C Intelligent Management Center User Manual
Page 104: Viewing a controller team, Viewing a service flow path, Setting the device label display mode
94
Device icon
Device name
Remarks
Controller Team
The controller team icon is displayed only when the controllers are
configured in team mode.
OF device
Devices that only support OpenFlow forwarding.
OF hybrid device
Devices that support both ordinary forwarding and OpenFlow
forwarding.
OF instance
Virtual OpenFlow devices.
Viewing device information
Select Device Information to view basic information about the devices and the information about the
controllers or OpenFlow instances configured on the devices.
Viewing device details
On the Overall Topology tab, right-click a device icon and select Device Information. The Device Details
window appears.
For more information about the device parameters, see "
Viewing OpenFlow instances on an OpenFlow switch
1.
On the Overall Topology tab, double-click an OpenFlow switch icon.
All OpenFlow instances configured on this OpenFlow switch are displayed in the expanded area.
The OpenFlow instances can be viewed or modified. For more information, see "
Modifying an OpenFlow instance
2.
To collapse all the OpenFlow instances, double-click the expanded area.
Viewing a controller team
1.
On the Overall Topology tab, double-click a controller team icon.
All the controllers in this team are displayed in the expanded area.
2.
To collapse all the controllers, double-click the expanded area.
Viewing a service flow path
1.
On the Overall Topology tab, click the Service Flow list in the toolbar.
2.
Click the path of a service flow, OpenFlow instances are grayed out if the selected service flow
does not pass through them.
3.
To restore display of the topology, select Service Flow from the list.
Setting the device label display mode
1.
On the Overall Topology tab, right-click a blank area in the topology.
2.
Click Device Label from the menu that appears.
3.
Select Show IP or Show Label.
The topology displays the device label in the selected mode.