H3C Technologies H3C Intelligent Management Center - Manual (Page 63)

53
Action Function
Copy TTL Inwards
Copy the TTL from the outermost header to the next-to-outermost
header.
Set MPLS TTL Set the MPLS TTL.
Decrement MPLS TTL Decrement the MPLS TTL value by one.
Push VLAN Tag Add a VLAN tag.
Pop VLAN Tag Remove the outermost VLAN tag.
Push MPLS Tag Add an MPLS tag.
Pop MPLS Tag Remove the outermost MPLS tag.
Set Queue Map the packet to a queue ID.
Group Forward the packet to a specified group for processing.
Set IP TTL Set the IP TTL.
Decrement IP TTL Decrement the IP TTL value by one.
Set Field Modify a specified field of the packet.
Push PBB Tag Add a PBB I-Tag.
Pop PBB Tag Remove the outermost PBB I-Tag.
Configuring actions for the Apply-Actions or Write-Actions
instruction
1. Access the Add OF Entry page.
2. Select Apply-Actions or Write-Actions.
3. Click Add for the selected instruction.
4. Specify an action:
{
Select Output and enter a port index.
{
Select Copy TTL Outwards.
{
Select Copy TTL Inwards.
{
Select Set MPLS TTL and enter a TTL value.
{
Select Decrement MPLS TTL.
{
Select Push VLAN Tag and then select a type from VLAN and PRV_BRDG in the list.
{
Select Pop VLAN Tag.
{
Select Push MPLS Tag and then select a type from MPLS_U and MPLS_M in the list.
{
Select Pop MPLS Tag and then select a type from MPLS_U and MPLS_M in the list.
{
Select Set Queue and enter a queue ID.
{
Select Group and enter a group ID.
{
Select Set IP TTL and enter a TTL value.
{
Select Decrement IP TTL.