Switching topology layout modes, Viewing openflow instances by controller, Setting the dpid and endpoint label display mode – H3C Technologies H3C Intelligent Management Center User Manual
Page 107: Viewing the tenant network, Viewing openflow instances by, Controller, Table 11
97
Table 11 Device icons description
Device icon
Device name
Remarks
Controller
The controller icon is displayed when the controllers are
configured in other modes rather than team mode.
Controller Team
The controller team icon is displayed only when the controllers are
configured in team mode.
OF instance
Virtual OpenFlow devices.
Endpoint N/A
Switching topology layout modes
1.
On the Logical Topology tab, the topology is set to spring layout by default. To switch to the fixed
layout, click the Stop icon
.
2.
To switch to the spring layout, click the Spring Layout icon
.
Viewing OpenFlow instances by controller
1.
On the Logical Topology tab, click the Controller list in the toolbar.
2.
Select a controller from the Controller list.
The selected controller and its managed OpenFlow instances, connected with dotted lines, are
displayed in the topology.
3.
To initiate the display, select Controller from the list.
Setting the DPID and endpoint label display mode
1.
On the Logical Topology tab, right-click a blank area.
The shortcut menu includes the following options:
{
DPID Label—Includes Show OF Instance DPID and Show OF Instance DPID Label.
{
Endpoint Label—Includes Display Endpoint IP, Display Endpoint MAC, and Hide Endpoint
Label.
2.
Select a display mode.
The topology displays DPIDs and endpoint labels in the selected mode.
Viewing the tenant network
1.
On the Logical Topology tab, click the Tenant list in the toolbar.
2.
Select a tenant from the Tenant list.
The OpenFlow instances rented by this tenant are displayed in the topology.
3.
To display all the OpenFlow instances, select Tenant from the list.