H3C Technologies H3C Intelligent Management Center - Manual (Page 41)

31
2. From the navigation tree, select VAN SDN Manager > OF Resource > OF Devices.
By default, the OF Instance page appears.
OpenFlow instance list contents
{
Status—Status of the OpenFlow instance:
− Critical
− Major
− Minor
− Warning
− Normal
− Unknown
− Unmanaged
{
OF Switch—Device label of the OpenFlow switch to which the OpenFlow instance belongs.
Click the device label to view detailed information about the OpenFlow switch.
{
DPID Label—DPID label of the OpenFlow instance:
− If the OpenFlow instance is synchronized from a controller, this field is the same as the DPID
of the OpenFlow instance.
− If the OpenFlow instance is created by an operator, this field displays the device label that
is configured by the operator.
Click the DPID label to view detailed information about the OpenFlow instance.
{
DPID—DPID that uniquely identifies the OpenFlow instance.
{
IP Address—IP address of the OpenFlow switch to which the OpenFlow instance belongs.
{
Controller—Controller to which the OpenFlow instance is connected.
{
OF Ports—Number of ports the OpenFlow switch assigns to the OpenFlow instance.
Click the link to view the OF Port List. For more information about enabling interfaces of an
OpenFlow instance, see "
Enabling/disabling ports for an OpenFlow instance ."
The OpenFlow port list includes the following parameters:
− Port Index—Index of the OpenFlow port to which the endpoint is connected. You can view
the port and port index in the OpenFlow port list.
− Port Name—Name of the port. Ports with names beginning with OFPP represent reserved
ports that are defined by the OpenFlow standard.
− MAC Address—MAC address of the OpenFlow port.
− Port Status—Status of the OpenFlow port.
− Current Speed (bps)—Current speed of the OpenFlow port, in bps.
− Max Speed (bps)—Maximum speed of the OpenFlow port, in bps.
{
Flow Entries—Total number of flow entries in the OpenFlow instance.
Click the link to view the list of flow entries in the OpenFlow instance. For more information, see
" Viewing the OpenFlow instance list ."
{
Endpoints—Number of endpoints to which the OpenFlow instance is connected. Click the link
to display the endpoint list window. The endpoint list includes the following parameters:
− IP Address—IP address of the endpoint.
− MAC Address—MAC address of the endpoint.