H3C Technologies H3C Intelligent Management Center - Manual (Page 72)

62
− Rate—Rate value above which the corresponding band may apply to packets. If the current
rate of packets exceeds the configured rates of multiple bands, the band with the highest
configured rate is used.
− Burst Size—Length of the packet or byte burst to consider for applying the meter.
− Band Type—Ways how packets are processed. Options are Drop and DSCP Remark.
− Details—Click the Details icon for the band to view. The band details page appears.
Viewing band details
In the band list, click the Details icon for the band you want to view. The band details page displays
the following information:
• Rate—Rate value above which the corresponding band may apply to packets. If the current rate of
packets exceeds the configured rates of multiple bands, the band with the highest configured rate
is used.
• Burst Size—Length of the packet or byte burst to consider for applying the meter.
• Band Type—Ways packets are processed. Options are:
{
Drop—Drop the packets.
{
DSCP Remark—Modify the drop precedence of the DSCP field in the IP header of the packets.
The Precedence Level field is displayed.
Adding a meter
1. In the meter list, click Add.
The Add OF Meter page appears.
2. In the Basic Information area, specify one or more of the following parameters:
{
Meter ID—Enter a meter ID.
{
Flags—Select flags for the meter. Options are:
− KBPS—The rate value is in kbps and the burst size value is in kb.
− PKTPS—The rate value is in pps and the burst size value is in packets.
− BURST—The burst size field in band is used and the length of the packet or byte burst is
determined by the burst size.
− STATS—Statistics about the meter list are collected.
{
Bands—Click Add. The Add Band window appears. Specify the following parameters:
− Rate—Enter a rate value for the band.
− Burst Size—Enter a burst size value for the band.
{
Band Type—Select a band type from the list. Options are:
− Drop—Drop the packets.
− DSCP Remark—Modify the drop precedence of the DSCP field in the IP header of the
packets. The Precedence Level field is required.
3. In the Select Device area, click Add.
The Select Device window appears. For more information about adding and selecting devices, see
"
Selecting devices ."