H3C Technologies H3C Intelligent Management Center - Manual (Page 64)

54
{
Select Set Field, select a field from the list, and configure the field value. For more information
about the fields, see " Match fields ."
{
Select Push PBB Tag and select PBB from the list.
{
Select Pop PBB Tag.
5. Click OK.
6. Repeat step 3 through step 5 to add all desired actions.
The following information is displayed for the added actions:
{
Action Type—Type of the action.
{
Value—Detailed information of the action.
{
Modify—Click the Modify icon to modify the action in the same way as an action is added.
{
Delete—Click the Delete icon to delete the action.
Modifying a flow entry
You can modify only the instruction set of a flow entry.
To modify a flow entry:
1. Access the flow entry list page.
2. In the flow entry list, click the Modify icon for a flow entry.
3. Modify the instruction type and contents for the flow entry. For more information about the
configuration procedure, see "
Configuring the instruction set for a flow entry ."
4. Click OK.
Deleting flow entries
The flow entry management function allows you to delete a single flow entry or multiple flow entries in
batches.
Deleting a single flow entry
1. Access the flow entry list page.
2. In the flow entry list, click the Delete icon for a flow entry.
A confirmation dialog box appears.
3. Click OK.
Deleting flow entries in batches
1. Access the flow entry list page.
2. Select one or more flow entries on the flow entry list.
3. Click Delete.
A confirmation dialog box appears.
4. Click OK.