Device details of an openflow instance, Flow table of an openflow instance, Of port list of an openflow instance – H3C Technologies H3C Intelligent Management Center User Manual
Page 44
34
a.
Click the Service tab.
b.
From the navigation tree, select VAN SDN Manager > OF Topology. By default, the Overall
Topology page appears.
c.
Click the Logical Topology tab.
d.
Right-click an OpenFlow instance and select View OF Instance Information from the shortcut
menu.
•
Virtual OpenFlow devices list
a.
Click the Service tab.
b.
From the navigation tree, select VAN SDN Manager > Network Virtualization > OF Device
Virtualization.
c.
On the page that appears, click the DPID label of a device.
Device details of an OpenFlow instance
•
DPID Label—DPID label of the OpenFlow instance. Click Modify to modify the DPID label of the
instance.
•
OF Switch—Device label of the OpenFlow switch to which the OpenFlow instance is located. Click
the device label to view detailed information about the OpenFlow switch.
•
Device Status—Status of the OpenFlow instance.
•
Connected Since—Time when the OpenFlow instance established a connection with the controller.
•
DPID—DPID that uniquely identifies the OpenFlow instance.
•
Last Polling Time— Time when the OpenFlow instance was most recently synchronized.
•
IP Address—IP address of the OpenFlow switch to which the OpenFlow instance is located.
•
Controller—Controller to which the OpenFlow instance is connected.
•
Endpoints—Number of endpoints connected to the OpenFlow instance.
•
Negotiated Version—Version of the OpenFlow standard that the OpenFlow instance matches.
•
Member VLAN—VLAN used for determining the range of VLANs on which the OpenFlow instance
takes effect. Both the member VLAN and the VLAN mask determine the range of VLANs on which
the OpenFlow instance takes effect.
•
VLAN Mask—VLAN mask used for determining the range of VLANs on which the OpenFlow
instance takes effect. Both the member VLAN and the VLAN mask determine the range of VLANs
on which the OpenFlow instance takes effect.
•
In-Band Management VLAN—In-band management VLAN of the OpenFlow instance. In this VLAN,
the OpenFlow instance is connected to the controller.
•
Description—Description of the OpenFlow instance.
Flow table of an OpenFlow instance
•
Table ID—ID of the flow table. The flow table with an ID of 0 is the default flow table that was
created along with the OpenFlow instance.
•
OF Entry—Number of OpenFlow entries. Click the link to view detailed information about
OpenFlow entries in the flow table.
OF port list of an OpenFlow instance
•
Port Index—Index of the OpenFlow port. The value is decided by the OpenFlow switch to which the
OpenFlow instance belongs.