H3C Technologies H3C S7500E Series Switches - Manual (Page 408)

14-6
To do… Use the command… Remarks
Configure manual route
summarization
aggregate ipv6-address prefix-length
[ as-set | attribute-policy
route-policy-name | detail-suppressed |
origin-policy route-policy-name |
suppress-policy route-policy-name ]*
Required
Not configured by
default.
Advertising a Default Route to a Peer or Peer Group
Follow these steps to advertise a default route to a peer or peer group
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address
family view
ipv6-family multicast —
Advertise a default route to an
IPv6 MBGP peer or peer group
peer { ipv6-group-name |
ipv6-address }
default-route-advertise
[ route-policy
route-policy-name ]
Required
Not advertised by default
With the peer default-route-advertise command executed, the router sends a default route
with the next hop being itself to the specified IPv6 MBGP peer/peer group, regardless of
whether the default route is available in the routing table.
Configure Outbound IPv6 MBGP Route Filtering
Follow these steps to configure outbound IPv6 MBGP route filtering:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address
family view
ipv6-family multicast —