H3C Technologies H3C S7500E Series Switches - Manual (Page 407)

14-5
Configuring IPv6 MBGP Route Redistribution
Follow these steps to configure IPv6 MBGP route redistribution:
To do… Use the command… Description
Enter system view system-view —
Enter BGP view bgp as-number —
Enter the MBGP multicast
address family view
ipv6-family multicast —
Enable default route
redistribution into the IPv6
MBGP routing table
default-route imported
Optional
By default, default route
redistribution is not allowed.
Enable route redistribution from
another routing protocol
import-route protocol
[ process-id [ med med-value |
route-policy
route-policy-name ] * ]
Required
Not enabled by default
If the default-route imported command is not configured, using the import-route command
cannot redistribute any IGP default route.
Configuring IPv6 MBGP Route Summarization
To reduce the routing table size on medium and large BGP networks, you need to configure
route summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6
multicast routes.
Follow these steps to configure IPv6 MBGP route summarization:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address
family view
ipv6-family multicast —