H3C Technologies H3C S7500E Series Switches - Manual (Page 318)

11-8
To do... Use the command... Remarks
Configure a static multicast
MAC address entry
mac-address multicast
mac-address vlan vlan-id
Required
No static multicast MAC address
entries exist by default.
z For details about the mac-address multicast command, refer to Multicast Routing and
Forwarding Configuration Commands in the IP Multicast Command Reference.
z When configuring a static multicast MAC address entry in system view, the configuration is
effective for the specified interface. When configuring a static multicast MAC address entry
in interface view or port group view, the configuration is effective only for the current
interface or interfaces in the current port group.
z Any legal IPv6 multicast MAC address except 3333-xxxx-xxxx (with x representing a
hexadecimal number from 0 to F) can be manually added to the MAC address table.
Displaying and Maintaining IPv6 Multicast Routing and
Forwarding
To do... Use the command... Remarks
Display the IPv6 multicast boundary
information
display multicast ipv6 boundary
[ ipv6-group-address [ prefix-length ] ]
[ interface interface-type interface-number ]
Available in
any view
Display the information of the IPv6
multicast forwarding table (on a
distributed device)
display multicast ipv6 forwarding-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } |
outgoing-interface { { exclude | include |
match } { interface-type interface-number |
register } } | statistics | slot slot-number ] *
[ port-info ]
Available in
any view