H3C Technologies H3C S7500E Series Switches - Manual (Page 118)

5-11
z For details about the ip vpn-instance, route-distinguisher and ip binding vpn-instance
commands, see MPLS L3VPN Configuration Commands in the MPLS Command
Reference.
z For details about the multicast routing-table command, see Multicast Routing and
Forwarding Configuration Commands in the IP Multicast Command Reference.
Configuring IGMP Versions
Because the protocol packets of different IGMP versions vary in structure and type, the same
IGMP version should be configured for all routers on the same subnet before IGMP can work
properly.
Configuring an IGMP version globally
Follow these steps to configure an IGMP version globally:
To do... Use the command... Remarks
Enter system view system-view —
Enter public instance IGMP view or
VPN instance IGMP view
igmp [ vpn-instance
vpn-instance-name ]
—
Configure an IGMP version globally version version-number
Optional
IGMPv2 by default
Configuring an IGMP version on an interface
Follow these steps to configure an IGMP version on an interface:
To do... Use the command... Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure an IGMP version on
the interface
igmp version version-number
Optional
IGMPv2 by default
Configuring Static Joining
After an interface is configured as a static member of a multicast group or a multicast source
and group, it will act as a virtual member of the multicast group to receive multicast data
addressed to that multicast group for the purpose of testing multicast data forwarding.