H3C Technologies H3C S7500E Series Switches - Manual (Page 397)

13-46
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# View the IPv6 PIM multicast routing table information on Switch E.
[SwitchE] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, FF0E::100)
RP: 1003::2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:16:56
Upstream interface: Register
Upstream neighbor: 4002::1
RPF prime neighbor: 4002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface102
Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34
IPv6 PIM-SSM Configuration Example
Network requirements
z Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub
network. The entire PIM domain operates in the SSM mode.
z Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.
z Switch D connects to the network that comprises the IPv6 multicast source (Source)
through VLAN-interface 300.
z Switch A connects to N1 through VLAN-interface 100, and to Switch D and Switch E
through VLAN-interface 101 and VLAN-interface 102 respectively.
z Switch B and Switch C connect to N2 through their respective VLAN-interface 200, and to
Switch E through VLAN-interface 103 and VLAN-interface 104 respectively.
z Switch E connects to Switch A, Switch B, Switch C and Switch D.
z The SSM group range is FF3E::/64.
z MLDv2 is to run between Switch A and N1, and between Switch B/Switch C and N2.