beautypg.com

H3C Technologies H3C S7500E Series Switches User Manual

Page 231

background image

7-30

[SwitchA-Vlan-interface102] pim sm

[SwitchA-Vlan-interface102] quit

[SwitchA] interface loopback 0

[SwitchA-LoopBack0] pim sm

[SwitchA-LoopBack0] quit

The configuration on Switch B, Switch C and Switch D is similar to the configuration on Switch A. The

specific configuration steps are omitted here.

# Configure a PIM domain border on Switch C.

[SwitchC] interface vlan-interface 101

[SwitchC-Vlan-interface101] pim bsr-boundary

[SwitchC-Vlan-interface101] quit

[SwitchC] interface vlan-interface 103

[SwitchC-Vlan-interface103] pim bsr-boundary

[SwitchC-Vlan-interface103] quit

[SwitchC] interface vlan-interface 104

[SwitchC-Vlan-interface104] pim bsr-boundary

[SwitchC-Vlan-interface104] quit

The configuration on Switch A, Switch B and Switch D is similar to the configuration on Switch C. The

specific configuration steps are omitted here.

3) Configure C-BSRs and C-RPs

# Configure Loopback 0 on Switch A as a C-BSR and a C-RP.

[SwitchA] pim

[SwitchA-pim] c-bsr loopback 0

[SwitchA-pim] c-rp loopback 0

[SwitchA-pim] quit

The configuration on Switch C and Switch D is similar to the configuration on Switch A. The specific

configuration steps are omitted here.

4) Configure MSDP peers

# Configure an MSDP peer on Switch A.

[SwitchA] msdp

[SwitchA-msdp] peer 192.168.1.2 connect-interface vlan-interface 101

[SwitchA-msdp] quit

# Configure MSDP peers on Switch C.

[SwitchC] msdp

[SwitchC-msdp] peer 192.168.1.1 connect-interface vlan-interface 101

[SwitchC-msdp] peer 10.110.5.2 connect-interface vlan-interface 104

[SwitchC-msdp] quit

# Configure an MSDP peer on Switch D.

[SwitchD] msdp

[SwitchD-msdp] peer 10.110.5.1 connect-interface vlan-interface 104

[SwitchD-msdp] quit

5) Configure SA message filtering rules

# Configure an SA message rule on Switch C so that Switch C will not forward SA messages for

(Source 1, 225.1.1.0/30) to Switch D.

[SwitchC] acl number 3001

[SwitchC-acl-adv-3001] rule deny ip source 10.110.3.100 0 destination 225.1.1.0 0.0.0.3

[SwitchC-acl-adv-3001] rule permit ip source any destination any