H3C Technologies H3C S7500E Series Switches - Manual (Page 157)

6-20
Task Remarks
Configuring C-BSR timers Optional
Enabling administrative scoping Optional
Configuring an admin-scope zone boundary Optional
Configuring Administrative Scoping
Configuring C-BSRs for each admin-scope
zone and the global-scope zone
Optional
Configuring Multicast Source Registration Optional
Disabling SPT Switchover Optional
Configuring PIM Common Features Optional
Configuration Prerequisites
Before configuring PIM-SM, complete the following task:
z Configure any unicast routing protocol so that all devices in the domain are interoperable at
the network layer.
Before configuring PIM-SM, prepare the following data:
z The IP address of a static RP and an ACL rule defining the range of multicast groups to be
served by the static RP
z C-RP priority and an ACL rule defining the range of multicast groups to be served by each
C-RP
z A legal C-RP address range and an ACL rule defining the range of multicast groups to be
served
z C-RP-Adv interval
z C-RP timeout
z C-BSR priority
z Hash mask length
z An ACL rule defining a legal BSR address range
z BS period
z BS timeout
z An ACL rule for register message filtering
z Register suppression time
z Register probe time
z The ACL rule, and sequencing rule for an SPT switchover