H3C Technologies H3C S7500E Series Switches - Manual (Page 210)

7-9
Enabling MSDP
Enabling MSDP globally in the public instance
Follow these steps to enable MSDP globally in the public instance:
To do... Use the command... Remarks
Enter system view system-view —
Enable IP multicast routing multicast routing-enable
Required
Disabled by default
Enable MSDP and enter public
instance MSDP view
msdp
Required
Disabled by default
Enabling MSDP in a VPN instance
To do... Use the command... Remarks
Enter system view system-view —
Create a VPN instance and enter
VPN instance view
ip vpn-instance
vpn-instance-name
—
Configure a route-distinguisher
(RD) for the VPN instance
route-distinguisher
route-distinguisher
Required
No RD is configured by default.
Enable IP multicast routing multicast routing-enable
Required
Disabled by default
Return to system view quit —
Enable MSDP and enter VPN
instance MSDP view
msdp vpn-instance
vpn-instance-name
Required
Disabled by default
z For details about the ip vpn-instance and route-distinguisher commands, see MPLS L3VPN
Configuration Commands in the MPLS Command Reference.
z For details about the multicast routing-table command, see Multicast Routing and Forwarding
Configuration Commands in the IP Multicast Command Reference.
Creating an MSDP Peer Connection
An MSDP peering relationship is identified by an address pair, namely the address of the local MSDP
peer and that of the remote MSDP peer. An MSDP peer connection must be created on both devices
that are a pair of MSDP peers.