Teac HS-4000 - Manual (Page 76)

76
TASCAM HS-4000
8 – Take mode
Editing take names
1. On the take selection screen, select the take with the name
that you want to change.
2. Touch the MENU button on the take selection screen to
open a pull-up menu.
Take selection screen with pull-up menu open
3. Touch the EDIT NAME button in the pull-up menu to open
the PROJECT NAME screen.
TAKE NAME screen
NOTE
If multiple takes are selected, the EDIT NAME button in the
pull-up menu cannot be selected.
4. Input the take name. Use the same input method as in
“Editing the project name” on page 40.
5. Touch the Enter button on the TAKE NAME screen or press
the DATA dial to confirm the take name and return to the
take selection screen.
CAUTION
Be aware that you can change the names of takes that are
used in playlist mode. If you do this to a take that is used in
playlist mode, an error pop-up message will appear when
you try to load a playlist that contains it.