Teac HS-4000 - Manual (Page 137)

TASCAM HS-4000
137
17 – Messages
Message Details and responses Remarks
Cannot increment Take.
System limit reached,Please make new
session.
The total number of files in the folder, including files
and subfolders, is too large, so starting recording of
the next take is not possible.
Cannot load to [A or B].
"llllllll"
is already loaded to [B or A].
The playlist that you tried to load is already loaded to
B or A, so it cannot be loaded to the other player. Load
a different playlist.
"llllllll" = playlist name
Cannot make more than
1000 sessions.
The maximum number of sessions has already been
reached, so a new session cannot be created.
Cannot make new Session.
Media Full.
The CF card does not have enough space, so you
cannot create a new session.
Cannot RECORD.
(Internal state error)
Something is preventing recording.
Cannot RECORD.
ABS time is over 24h
The timeline mode's ABS time exceeds 24 hours so
recording cannot be started.
Cannot RECORD.
Media Full.
The CF card does not have enough space, so you
cannot start recording.
Cannot RECORD
Play Fs setting is not OFF
Please change Play Fs to OFF
Recording is not possible because Play Fs is set to
Pull-up or Pull-down. Set Play Fs to OFF.
Cannot RECORD
System limit reached.
Please make new Session.
The total number of items in the folder, including files
and folders, is too large, so starting recording is not
possible.
Cannot RECORD.
Take limit reached.
Please change to another Session
Since the maximum number of recordable takes or
maximum take number has been reached, recording is
not possible. Change the session.
Cannot Retake.
No Recent REC history.
Retaking is not possible.
Cannot set Mark point
in ON AIR Mode.
Marks cannot be added when in on-air mode.
Cannot set Mark point
in read-only file.
Marks cannot be added to a file that has been set as
read-only
Cannot set Mark point.
Mark limit reached.
No more than 99 marks can be created in one file.
Cannot turn Fs convert On.
CHn-n D-In is already
Master Clock.
You tried to turn the sampling rate converter on for
the digital input that is selected as the master clock.
n-n = 1-2, 3-4, 5-6, 7-8
Cannot use Bridge file
because it is illegal.
The bridge file is invalid, so it could not be used.
Capture BC$ Time to ALL?
BC$STANDBY -> Start
BC$END -> End
Confirm changing all entries to the region between
BC$STANDBY and BC$END mark times.
Capture BC$ Time?
BC$STANDBY -> Start
BC$END -> End
Confirm changing to the region between
BC$STANDBY and BC$END mark times
CFn (vvvvvvvv)
Fs: fs
USED SIZE: u
FREE SIZE: f
TOTAL SIZE: t
This shows information about the CF card when in on
air mode.
n= 1 or 2
vvvvvvvv = volume level
fs: current sampling frequency setting
u: used capacity
f: unused capacity
t: total capacity of CF card
CFn DEVICE ERROR The CF card cannot be recognized. n = 1 or 2
CFn Format failed
An error occurred during formatting, and formatting
could not be completed.
n = 1 or 2
CFn formatting not optimal
for Recording.
Since the media was not formatted by this unit,
normal recording operations cannot be guaranteed.
Format the media with this unit before use.
n = 1 or 2
This appears when recording is started
using a card formatted with a cluster
size that is smaller than the standard
of this unit.