Teac HS-4000 - Manual (Page 122)

122
TASCAM HS-4000
13 – Other functions
Confidence monitoring
During recording, the recorded audio can be read back right
away from the media and output for monitoring.
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the REC SETUP button to open the REC SETUP screen.
3. Touch the ON button of the Confidence Monitor item to
enable the confidence monitoring function (default: ON).
Confidence monitoring operation conditions
To use the confidence monitoring function, the following
settings are necessary.
Fs (sampling frequency): 44.1k, 48k, 48k–0.1% or 48+0.1k
TIMELINE Rec Tracks (in timeline mode): 2tr
Number of tracks armed for recording (in take mode): No
more than 2 total
NOTE
• Set the Fs item when creating a project, and set the
TIMELINE Rec Tracks item when creating a session (or when
creating a project for the first session). These cannot be
changed after the creation of a project or session.
• When using confidence monitoring, the playback sound is
delayed about 2.4 seconds before output.
• When a region (take) is divided or the recording region
(take) reaches the maximum size, the confidence
monitoring playback sound will be interrupted for a few
seconds.
Online functions
Use the ONLINE key to turn this function on/off.
Enabling the online function
In order to use online function, the online function must be set
to Switchable.
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the SYSTEM SETUP button to open the SYSTEM SETUP
screen.
3. Touch the Switchable button of the ONLINE Function
item to change the online function setting (default value:
Switchable).
When the online function setting is AlwaysON, the online
playback mode is always enabled and the ONLINE key stays
lit to indicate this status.