Teac HS-4000 - Manual (Page 35)

TASCAM HS-4000
35
4 – Basic operation
Online function
To output audio from the line output connectors, open the ON
LINE key cover on the front panel and press the ON LINE key.
The ONLINE key lights when ON. You can also connect a TASCAM
RC–HS32PD remote controller (sold separately), for example,
and use its master fader to adjust the level suitably.
When the master fader is at its lowest position, audio will not be
output from the line output connectors.
Press the ONLINE key again to turn it OFF. That key becomes
unlit, and sound ceases to be output from the output
connectors.
For details about the online function, see “Online functions” on
page 122.
Recording operation limitations
With this unit, if the total number of files, folders and other items
in one folder becomes too great, recording to that session will
be restricted in the following ways.
8
When the total number of items in one folder
exceeds about 20000
Recording of a new take might not be possible even when
starting recording from a stopped state. When a project or
session is loaded, recording to that session might not be
possible. In these cases, the following pop-up message appears.
In this case, the remaining recording time indicator for the
currently selected CF card on the Home Screen shows Rec Limit.
CAUTION
The total number of items inside one folder includes
files and folders not created by this unit. Management
files, system files and other files and folders that are not
ordinarily visible are also included in the total.