Teac HS-4000 - Manual (Page 30)

30
TASCAM HS-4000
4 – Basic operation
In this chapter, we explain the basic operation procedures that
are the same in each operation mode.
The display on this unit functions as a touchscreen.
Operate the unit using its keys, switches and touchscreen
display buttons.
On every screen except the Home Screen, a
button appears
at the top left. Touch this button to return to the previous
screen.
NOTE
You can also return to the previous screen by pressing the
EXIT/CANCEL (PEAK CLEAR) key.
CF card preparation
CF card selection
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the CF MANAGE button to open the CF MANAGE
screen.
3. Touch the SELECT button next to the CF SELECT item to
open the CF SELECT screen.
NOTE
You can also open the CF SELECT screen by touching the
recording media display button on the Home Screen.
4. Touch the button for the CF card that you want to use to
select it.
The background of the selected CF card appears yellow.
5. Touch the SET button to return to the CF MANAGE screen.
6. If you also want to format the CF card now, follow the proce-
dures starting with step 3 in “Formatting a CF card” below.
Formatting a CF card
CAUTION
• Formatting a CF card erases all the data on it.
• Always format cards using this unit or another TASCAM
HS Series device. If a CF card that has been formatted by
another device or PC is used, operation might be affected.
1. Press the MENU key on the front panel to open the MENU
screen.