Teac HS-4000 - Manual (Page 147)

TASCAM HS-4000
147
18 – Specifications
IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies:
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048:48kHz±0.1% pull-down/pull-up)
(Single/Double)
Control inputs and outputs
RS–422
Connector type: D-sub 9-pin (female, inch-specification)
RS–232C
Connector type: D-sub 9-pin (female, inch-specification)
PARALLEL
Connector type: D-sub 25-pin (female, inch-specification)
TIME CODE IN
Connector type: XLR-3-31
Signal voltage amplitude: 0.5 – 10 Vp-p
Input impedance 10 kΩ
Format: SMPTE 12M-1999 compliant
TIME CODE OUT
Connector type: XLR-3-32
Signal voltage amplitude: 2 Vp-p
Output impedance: 100 Ω
Format: SMPTE 12M-1999 compliant
WORD/VIDEO IN connector
Connector type: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp-p (VIDEO IN)
Input impedance: 75 Ω±10%
Permissible frequency variation during external synchronization:
±100 ppm
Includes switch for enabling termination
Input frequency (WORD):
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048:48kHz±0.1% pull-down/pull-up)
Input signal (VIDEO):
24/25/29.97/30Frame
(NTSC/PAL Black burst, HDTV Tri-Level)
WORD/VIDEO THRU/OUT connector
Connector type: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance: 75 Ω ±10%
Output frequency (WORD):
44.1/47.952/48/48.048/88.2/96 kHz
(47.952/48.048kHz:48k±0.1% Pull-down/Pull-up)
Frequency stability ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included (OUT is only for WORD OUT)
ETHERNET
Connector type: RJ45
Supported specifications: 100BASE-TX, 1000BASE-T
KEYBOARD
Connector type: Mini DIN (PS/2)
USB Connector:
USB A-type 4-pin
Protocol: USB2.0 HIGH SPEED(480Mbps)
REMOTE
Connector type: ETHERCON (CAT6 supported)
Supplied power voltage: 41 V
Signal: LVDS serial
Audio performance
Frequency response
ANALOG IN to ANALOG OUT:
i
20Hz - 20kHz:±0.5dB
(Fs=44.1/48kHz, JEITA) (recording and playback)
i
20Hz - 40kHz: +0.5dB/−2dB
(Fs=88.2/96kHz, JEITA) (recording and playback)
Distortion
ANALOG IN to ANALOG OUT:
0.005% or less (JEITA) (recording and playback)
S/N ratio
ANALOG IN to ANALOG OUT:
100 dB or more (JEITA) (recording and playback)
Other specifications
Power
AC 100-240 V, 50–60 Hz
Power consumption
19W
External dimensions (W x H x D, excluding
protrusions)
482.6 x 94 x 317.1mm/19.00 x 3.70 x 12.48 in
Weight
5.1 kg/11.24 lb
Operating temperature range
5 - 35 °C