Teac HS-4000 - Manual (Page 51)

TASCAM HS-4000
51
7 – Timeline mode
4. Touch the Session Name button to open the SESSION NAME
screen where you can change the session name.
Use the same input method as in “Editing the project name”
on page 40.
NOTE
You cannot use the “@” symbol at the beginning of a session
name.
5. Touch the Enter button or press the DATA dial to return to
the MAKE SESSION screen.
6. If necessary, set the timeline starting time and number of
recording tracks.
7. When you have finished making settings, press the MAKE
SESSION button.
8. When a confirmation pop-up message appears, touch the
OK button or press the DATA dial to create a new session and
return to the Home Screen.
For details about session operations, see “Session operations” on
page 43.
Arming tracks for recording
1. Press the HOME key on the front panel to open the Home
Screen.
2. Touch the REC/MON button to open a pull-up with REC and
MON buttons.
To arm tracks for recording, touch their record arm buttons.
When a track is armed to record, its button appears red.
NOTE
The record function for the number of tracks set with the
"TIMELINE Rec Tracks" item when a project/session was
created is linked.
Recording mode settings
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the REC SETUP button to open the REC SETUP screen.
On the REC MODE page, you can turn confidence
monitoring on or off. For details, see “Confidence
monitoring” on page 122.