Rebuilding sessions, Copying sessions, Rebuilding sessions copying sessions – Teac HS-4000 User Manual

Page 44: 5 – projects

TASCAM HS-4000

5 – Projects

Rebuilding sessions

Use to rebuild when, for example, a file has been erased from

the unit using FTP or an incompatibility develops between

management and audio files.
1. Press the PROJECT key on the front panel to open the

PROJECT screen.

2. Touch the e button for the project that contains the session

that you want to rebuild to open the session selection

screen.
If it is not the current project, a pop-up window appears

confirming that you want to load it.

3. Select the session that you want to rebuild.

Touch the MULTI SELECT button to enable the selection of

multiple sessions.

4. Touch the MENU button on the session selection screen to

open a pull-up menu.

One session selected

Multiple sessions selected

5. Touch the REBUILD button in the pull-up menu.
6. Touch the OK button or press the DATA dial when a confir-

mation pop-up message appears.

During rebuilding, the status of progress is shown in a

pop-up window.
When rebuilding completes, the pop-up window disappears.

NOTE

• You can also rebuild a session from that session’s take

selection screen.

• If you rebuild without selecting a session on the session

selection screen, the entire current project will be rebuilt.

Copying sessions

You can copy session folders between CF 1 and CF 2 (two CF

cards are necessary). When you copy a session, the same folder

structure is created at the copy destination.

CAUTION

If you copy a session with a different sampling frequency

into a project, the session cannot be rebuilt.

1. Press the PROJECT key on the front panel to open the

PROJECT screen.

2. Touch the e button for the project that contains the session

that you want to copy to open the session selection screen.
If it is not the current project, a pop-up window appears

confirming that you want to load it. Touch the OK button.

3. Select the session that you want to copy.