Teac HS-4000 - Manual (Page 123)

TASCAM HS-4000
123
13 – Other functions
Switching the online playback mode
When the online function can be changed (ONLINE Function
item is set to Switchable), the following operations can be used
to turn the online playback mode on/off.
• Main unit: press the ON LINE key
• When parallel control connected: ONLINE event
• When RS-232C serial control connected: ONLINE command
• TASCAM RC-HS32PD remote controller (sold separately):
press the ONLINE key
In dual or A/B MIXED mode, only the online playback mode
for the selected player can be turned ON/OFF on screen. When
using a TASCAM RC-HS32PD remote controller (sold separately),
however, regardless of which player is selected, you can press
the player A or B ONLINE key to turn online playback mode ON/
OFF for the corresponding player.
When online playback mode is turned ON/OFF, the following
occurs depending on the mode.
When in timeline, take, single playlist or on-air mode
• When online playback mode is turned ON, the
icon appears at the top left of the screen
and the ON LINE key lights red.
• When online playback mode is turned OFF, the
icon disappears from the top left of the
screen and the ON LINE key becomes unlit.
When in dual playlist or A/B MIXED mode
• When online playback mode is turned ON, the
icon changes to the icon at the top left of the
time counter for the selected player, the time counter
background turns red and the ON LINE key lights.
• When online playback mode is turned OFF, the
icon changes to the icon at the top left of the
time counter for the selected player, the time counter
background turns black and the ON LINE key becomes unlit.
Outputs during online playback
The relationship between online playback mode and sound
outputs are as follows.
Online playback mode OFF ON
Analog line outputs (1−4) - ü
Digital line outputs (1−2, AES/EBU) - ü
Analog monitoring output (L, R) ü * ü *
Headphones ü * ü *
RC-HS32PD (headphones, speakers) ü * ü *
*The monitoring signal is always output.
CAUTION
When the ONLINE Function item is set to AlwaysON, sound is
always output from all connectors.
TIP
By turning the Monitor Mute by Online item (MIXER SETUP
screen SETUP page) ON, you can enable monitoring output
to automatically be turned off when online playback mode
is on.
For details about the Monitor Mute by Online item, see
“SETUP page (MIXER SETUP screen)” on page 110.
Flash start function
Use the flash start function to instantly start playback of takes
that you have designated in advance.
A maximum of 96 takes (2x96 takes in dual player mode) can be
started instantly using a keyboard or devices connected to this
the unit’s remote connectors (REMOTE and PARALLEL).
Setting the flash key function
1. Press the MENU key on the front panel to open the MENU
screen.