Teac HS-4000 - Manual (Page 16)

16
TASCAM HS-4000
2 − Names and functions of parts
Home Screen
Press the HOME key to open the Home Screen.
In timeline mode
1 ONLINE status indication
When the online sending mode is ON, the
red icon appears.
When the online sending mode is OFF, the
icon appears unlit.
2 Repeat status indication
When repeat playback is ON, the green
icon appears.
When repeat playback is OFF, the
icon
does not appear.
3 Confidence monitoring status icon (button)
This icon shows the status of confidence monitoring.
Confidence monitoring active
Confidence monitoring unavailable*
Confidence monitoring OFF
*This appears when confidence monitoring is on, but
cannot be used due to limits on the sampling frequency or
number of recording tracks.
Touch this button to open the REC MODE page of the REC
SETUP screen where you can set confidence monitoring.
(See “REC MODE page” on page 101.)
NOTE
This button only appears in timeline and take modes.
4 Time counter display (button)
The time displayed is the elapsed time, the remaining time
or the timecode time. Touch this area to open a pull-down
menu where you can change the time display mode. To
close the pull-down menu, touch the time counter or one
of the mode buttons in the menu, or press the HOME key or
EXIT/CANCEL key.
5 Time mode indicator (button)
This shows the current time display mode.
Touch this area to change the time display mode.
The time elapsed from the beginning of
the timeline is shown.
The timecode for the timeline is shown.
6 Timecode status button/indicator
When accurate timecode is input and
recognized correctly, the TC indicator
appears green.
When timecode is not recognized correctly,
the TC indicator does not appear.
Synchronized playback status is shown when playback is
synchronized to timecode.
The CHASE indicator appears green
during synchronized operation with
external timecode or the internal
timecode generator (selectable)
§
The CHASE indicator appears unlit
when not being operated in synchroni-
zation with timecode or when synchro-
nization is lost.
Touch this area to open the SYNC T/C screen. (See “Sync and
timecode settings (SYNC T/C)” on page 104.)
7 Audio synchronization status button/indicator
When synchronized with a master
clock, the SYNC indicator appears
green.
§
When not synchronized with a master
clock, the SYNC indicator appears unlit.
Touch this area to open the SYNC T/C screen. (See “Sync and
timecode settings (SYNC T/C)” on page 104.)
8 Transport status indicator
This icon shows the current transport status.
Playing back or jogging playback (forward)
Jogging playback (reverse)
Playback standby
Stopped
Searching backward
Searching forward
Searching backward (high-speed search)
Searching forward (high-speed search)
The number shown when searching
backward (shuttle operation) changes with
the current speed: x2, x4, x8, x16, x32.