Teac HS-4000 - Manual (Page 32)

32
TASCAM HS-4000
4 – Basic operation
2. Touch the Quick & Create Project button next to the FORMAT
item. The following pop-up window message appears.
This window shows the project name, session name,
sampling frequency, bit rate, frame type and number of
tracks in the project to be created.
3. Click the OK button in the pop-up window.
Another pop-up window appears to reconfirm.
4. Click the OK button in the pop-up window.
After quick formatting completes, a new project is created
automatically.
After the project is created, the Home Screen reopens.
NOTE
Touch the CANCEL button in the pop-up window to cancel
formatting and return to the CF MANAGE screen.
Creating a new project
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the CREATE PROJECT button to open the CREATE
PROJECT screen.
The CREATE PROJECT screen has 3 pages.
On the first page, you can set the project name, the name
of the first created session, the sampling frequency, and the
sampling frequency written to BWF chunks.
For details about all of the settings, see “Creating new
projects” on page 39.
3. Touch the NEXT button to open the next page.
On this page, you can set the frame type and bit length.
NOTE
Touch the NEXT button again to open the third page where
you can set the starting time and number of tracks in
timeline mode, for example.
For details about each item, see “Creating new projects” on
page 39.
Press the CREATE PROJECT button to restart from step 6.
4. Touch the NEXT button again to open CREATE PROJECT
screen 3/3.
Set the start time and number of tracks for timeline mode
and whether or not to use other settings from the previous
project.
For details about the various settings on CREATE PROJECT
screens 1–3, see “Creating new projects” on page 39.
5. After you complete making settings touch the CREATE
PROJECT button.
NOTE
If a project with the same project name already exists, the
CREATE PROJECT button appears gray and you will not be
able to create a new project. If this happens, change the
project name.
6. Check the settings on the confirmation pop-up message
that appears.
Press the OK button to confirm them and return to the
Home Screen.
When creation of the project completes, the Home Screen
reopens.