Teac HS-4000 - Manual (Page 24)

24
TASCAM HS-4000
2 − Names and functions of parts
On-air mode
On-air mode
1 Take name (button)
This shows the icon and name of the currently loaded take.
Touch this area to open a pull-down menu.
ON AIR List button
This shows the ON AIR List screen. (See “Selecting files for
on-air playback” on page 98.)
REBUILD button
Use to rebuild when, for example, a file has been erased
from the unit using FTP.
2 Information field
On the on-air mode Home Screen, the names of the next
two takes are shown in the information field.
Touch this information field to switch to the ON AIR List
screen.
3 ON AIR button
Touch to switch between actual playback and rehearsal/
confirmation playback modes. (See “Using the ON AIR
button to switch between rehearsal/confirmation playback
and actual playback modes” on page 99.)
4 CREDITS 7 button
Touch to conduct credits playback. This starts playback from
the beginning of the selected file and stops at the applicable
mark. (See “Conducting credits playback” on page 99.)
NOTE
• The ON AIR button only functions when stopped.
• The CREDITS 7 button functions when the ON AIR button is
off and playback is stopped or when the ON AIR button is off
during CREDITS playback. It does not function when the ON
AIR button is on or during ordinary playback.
• During credits playback, press the CREDITS 7 button to
stop playback. (Use it to toggle between credits playback
and a stopped state.)