Teac HS-4000 - Manual (Page 62)

62
TASCAM HS-4000
7 – Timeline mode
Pasting the copy buffer data at a set point
(Paste)
You can paste the copied content at a set point.
NOTE
If the pasted region is in a fade in or fade out, that fade in/
fade out is cleared.
Copy buffer
1. Press the HOME key on the front panel to open the Home
Screen.
2. Touch the EDIT MODE button to enter edit mode.
If "TIMELINE Rec Tracks" is set to "2trx2", select the tracks
where the data will be pasted.
3. Move the timeline cursor to the position where you want to
paste the data.
4. Touch the EDIT button to open a pull-up menu.
Touch the Paste button in the pull-up menu.
If the track numbers or number of tracks in the copy buffer
differ from the tracks where the data will be pasted, a
pop-up message will appear to confirm the tracks where
the data will be pasted. If there is no problem, touch the OK
button or press the DATA dial.
NOTE
The Paste button appears white and is only usable when the
copy buffer has data.
5. When pasting completes, the Home Screen will be shown
again after a pop-up message appears.
At this time, the EDIT pull-up menu will still be open.
Inserting/pasting data from a select file at a
set point (Ins/Paste File)
You can insert or paste an entire BWF/WAV file at a set point.
NOTE
• You can only insert and paste files that have the same
number of tracks as the "TIMELINE Rec Tracks" setting. If you
try to insert or paste a file that has a different number of
tracks, it will not be possible and a message will appear.
• All regions that follow the insertion point will be shifted
backward by the amount of time of the inserted file.
• If the file is inserted into a region, three regions will be
created: one before the timeline cursor, one with the
inserted file and one after the timeline cursor.
• If the set point is in a fade in or fade out, that fade in/fade
out is cleared
• If the pasted file is in a fade in or fade out, that fade in/fade
out is cleared.
bwf file
File insertion
bwf file
File pasting
1. Press the HOME key on the front panel to open the Home
Screen.
2. Touch the EDIT MODE button to enter edit mode.
If "TIMELINE Rec Tracks" is set to "2trx2", select the tracks
where the data will be inserted.
3. Move the timeline cursor to the position where you want to
insert the file.
4. Touch the EDIT button to open a pull-up menu.
Touch the Ins/Paste File button in the pull-up menu to open
the SELECT FILE screen.