Teac HS-4000 - Manual (Page 42)

42
TASCAM HS-4000
5 – Projects
Rebuilding projects
Use to rebuild when, for example, a file has been erased from
the unit using FTP or an incompatibility develops between
management and audio files.
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Select the project that you want to rebuild.
You can touch the MULTI SELECT button on the PROJECT
screen to allow the selection of multiple projects.
3. Touch the MENU button on the PROJECT screen to open a
pull-up menu.
One project selected
Multiple projects selected
4. Touch the REBUILD button in the pull-up menu.
5. Touch the OK button or press the DATA dial when a confir-
mation pop-up message appears.
During rebuilding, the status of progress is shown in a
pop-up window. When rebuilding completes, the pop-up
window disappears.
NOTE
If you rebuild when no project has been selected in the
PROJECT screen, the selected CF card is rebuilt entirely.
Erasing a project
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Select the project that you want to erase.
You can touch the MULTI SELECT button on the PROJECT
screen to allow the selection of multiple projects.
3. Touch the MENU button on the PROJECT screen to open a
pull-up menu.
One project selected
Multiple projects selected
4. Touch the DELETE button in the pull-up menu.
5. Touch the OK button or press the DATA dial when a confir-
mation pop-up message appears.
During erasure, a progress status pop-up appears.
When erasure completes, the pop-up disappears.
CAUTION
When you erase a project, all session folders, session data,
takes and playlists in the project are also erased.