Gasboy FuelOmat system 8 Popt Commverter User Manual
Gasboy Hardware
Table of contents
Document Outline
- MDE-4820H 8 PORT COMMVERTER OPERATION AND INSTALLATION MANUAL
- GENERAL DESCRIPTION
- APPLICATIONS
- 2.1. SCOPE
- 2.2. COMMVERTER SYSTEM ARCHITECTURE
- 2.3. TYPES OF FUEL PUMP AND THEIR COMMUNICATION METHOD
- 2.4. CONNECTORS
- 2.5. LAN to RS485 APPLICATION
- 2.6. LAN to RS-232 APPLICATION
- 2.7. LAN to CURRENT LOOP
- 2.7.1. LAN to Current Loop Application
- 2.7.2. Current Loop Connector Pinout
- 2.7.3. Current Loop Module Jumpers
- 2.7.4. Current Loop Electronic Devices (Pump or any Current Loop Devices)
- 2.7.5. Wayne Pump Configuration Example
- 2.7.6. Gilbarco Legacy & Gasboy 8800 Current Loop Electronic Pumps Configuration
- 2.7.6.1. SiteOmat Configuration for Gilbarco Legacy & Gasboy 8800 Current Loop Electronic Pumps
- 2.8. LAN to TOKHEIM APPLICATION
- 2.9. 4xCONTACTOR APPLICATION
- 2.10. LAN to RS422 APPLICATION
- 2.11. LAN TO NUOVO PIGNONE APPLICATION
- 2.12. LAN TO RS232/485 APPLICATION
- 2.13. MECHANICAL PUMP INTERFACE (MPI-C)
- 2.14. 5-PORT LAN SWITCH
- 2.15. CETIL ER3 MODULE
- 2.16. DOOR OPEN DETECTION
- COMMVERTER DESCRIPTION
- INSTALLATION AND GROUNDING
- SETUP AND CONFIGURATION
- 5.1. GENERAL
- 5.2. DISPLAYING THE MAIN PAGE
- 5.3. ETHERNET SETUP PROCEDURES
- 5.4. TCP PORTS SETUP PROCEDURES
- 5.5. SERIAL PORTS SETUP PROCEDURES
- 5.6. PIPES SETUP PROCEDURES (NOT TO BE USED)
- 5.7. DIGITAL I/O PORTS SETUP PROCEDURES (NOT TO BE USED)
- 5.8. ADMINISTRATION TASKS PROCEDURES
- 5.9. SYSTEM MONITOR INFORMATION SCREENS
- 5.10. TERMINAL SCREEN (Not to be used)
- CHECKS AND TROUBLESHOOTING
- APPENDIX A UPGRADING THE COMMVERTER TO A NEW VERSION
- APPENDIX B PLANNING AND CONNECTION OF PI’S