Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 128)

Distributors have different plug-in types as spare parts. Distributor or technician has the option to
add, in the station, and according to specific station peripherals the following plug-ins:
 Mechanical pumps:
o RS-232 plug-in in slot 3 for TLG.
o RS-485 plug-in in slot 4 if controller already supports 4 mechanical pumps and need
to support more electronic pumps.
 Electronic pumps:
o RS-232 plug-in in slot 3 for TLG.
o RS-485 plug-in in any slot if site has more then 16 electronic pumps (Gasboy atlas
9800).
o Different electronic dispenser types that require different plug-in cards, for example:
o Each Current loop plug-in card can support up to 8 Bennet pump heads.
o Each Tokheim plug-in card can support up to 2 Tokheim pump heads.
o The different wiring in such cases is described in the installation manual and
in specific label inside the product.
In cases where a station or island includes both electronic and mechanical, they can be supported by
one controller, up to 4 mechanical dispensers with 2 MPI-C cards and up to 16 electronic dispensers
with one RS-485 card (Slot 4). This solution requires adding extra RS-485 plug-in to support the
electronic pumps.
Example of complex station (Each yellow square represent one pump head):
Example of suggested solution for complex station:
8 Port CommVerter Operation and Installation Manual 124