Specifications, Communication rates, Electrical – Gasboy FuelOmat system 8 Popt Commverter User Manual
Page 19: Mechanical pump rates, Specifications 1.5.1. communication, Rates, Electrical 1.5.3. mechanical, Pump

8 Port CommVerter operation and installation manual
15
1.5.
SPECIFICATIONS
Important Notice
At a rate above 9600 bps, the communication protocol with the 8Port Commverter shall handle 250 bytes
packets. The 8Port Commverter does not support a bytes stream flow at a rate higher than 9600 bps.
1.5.1.
Communication Rates
The communication rates depend on the type of module.
No.
Module
Value
1
RS-232 Module
57600 bps max.
2
RS-485 Module
57600 bps max.
3
TCP/IP Module
100 Mbps (optional)
4
Current Loop 24V 45mA
9600 bps max.
5
Tokheim
9600 bps max.
1.5.2.
Electrical
No.
Parameter
Value
1
Supply Voltage:
-
Enclosed
Commverter
unit
- PCB unit
110 – 230 VAC, 50-60Hz
15 to 24 VDC
2
Power Consumption
Typical 5W
Maximum 25W
3
Protection
1.5A Fuse, internal on board.
1.5.3.
Mechanical Pump Rates
No.
Parameter
Value
1
Power supply output voltage
to Pulsar Unit
12 VDC +/-20%
2
Power supply maximum
output current
80 mA max
3
Pulsar Input High level
voltage
10 to 16 VDC (standard)