Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 90)

Figure 3-8. CommVerter Unit Setup Site – Ethernet Screen
10. Enter the required IP Address
11. Click Send
12. Click Admin Tasks. The Admin screen is
displayed. (see Figure 3-7)
13. Select the Write to eeprom and reset radio button
14. Click on the Send button. Wait until the Terminal
screen is displayed (see Figure 3-9) to verify the
command was sent
Figure 3-9. CommVerter Unit Setup Site – Terminal Screen
8 Port CommVerter Operation and Installation Manual 86