Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 52)

2.8. LAN to TOKHEIM APPLICATION
The LAN to Tokheim module is installed in the CommVerter whenever the pumps in the station are
of Tokheim brand. The CommVerter converts the LAN into Tokheim (and vice versa). Figure 2-27
shows a block diagram of a LAN to Tokheim communication application
Figure 2-27. LAN to Tokheim Configuration
o This module (two separate ports) interfaces with up to two pumps. In this configuration'
each pump is interfaced in a separate port.
o This module can be set to 5V or12V according to the Pump Interface requirement (Jumper
setting).
Figure 2-28. LAN to Tokheim Module, Two Pumps Configuration
8 Port CommVerter Operation and Installation Manual 48